EAN800A/EAN800AW
•IP address
•Subnet mask
•Gateway (when using the gateway server/router)
•Primary DNS, Secondary DNS (when using DNS)
•HTTP Port
IP SETTING
IP Type
DHCP: Configure the DHCP server not to assign the same IP addresses used for the other network cameras and PCs whose IP address is unique.
Refer to the network administrator for the settings of the server. Default: DHCP.
Static IP: User can manually set the static IP for network connection.
PPPoE: This is a DSL connection application, ISP will ask user to input user name and password.
Note: If PPPoE is used as IP type, IP Utility software will not be able to detect the device.
IP address
When not using DHCP, enter the IP address of the camera. Do not enter the IP address already used for PC or other network cameras.
Subnet Mask
This field is to set the netmask for your network so as the IP camera will be recognized within the network. Example: 255.255.255.000. When DHCP is selected, the DHCP server will assign this value automatically.
Gateway
This field is to set the gateway for your network so the IP camera will be recognized within the network. When DHCP is selected, the DHCP server will assign this value automatically.
Primary DNS
An IP address of DNS server that is provided by ISP.
15