EAN800A/EAN800AW

Note: Record segment is limited to 5 min. If you need to do long time recording, please set schedule recording. For more details about schedule recording, please see “4.7 Event”.

8. Snapshot
The	Snapshot button saves a snapshot of the video image currently being

displayed. The location where the snapshot data is saved can be specified in Setting -> User’s Config. Please refer to “4.2 User Config” for further information.

9~10. Play Audio/Transmit Audio

Click the “Play Audio” and “Transmit Audio” buttons to switch the sound off and on for the speaker and microphone, respectively.

11. Manual Control – Trigger Event

Press “Trigger Event” button to trigger an event directly from live view page, and event actions will be effective if they have been set in “Event” menu. (Please refer to “4.7.1 Event”)

12. Manual Control – Reset Alarm Press “Reset Alarm” button to reset alarm output remotely.

13. Status Display

The name of the camera whose settings currently being configured, current date/time and current frame rate will be displayed.

14. Event signals Alarm Motion

When an alarm or motion event is triggered, a signal icon will flash to alert user. The first icon is for alarm event and rest of the 5 icons are for motion event. The motion event icons which differed by colors correspond to the motion trigger areas you have set in Motion menu. Please refer to “4.7.2 Motion” for detailed information about Motion setup.