NAD S170 owner manual Rear Panel, COMPOSITE VIDEO OUT 4-6OUT MON OUT Connect to

REAR PANEL

ATTENTION!
		9	RS-232: Connect to the RS-232 serial port of a home-automation
	Please make all connections to your S170 preamplifier with the unit		system or personal computer (see "System Integration," below).
	powered off or unplugged. (It is equally wise to power-down or	10	VIDEO 1-6 Analog Audio Inputs: Connect to stereo analog outputs
	unplug all associated components while making or breaking any		of audio-video sources (see "Source Setup," below).
	signal or AC power connections.)	11	VIDEO ANALOG REC OUT 4-6: Connect to stereo analog inputs of
			recording audio-video components such as videocassette recorders.
1	COMPOSITE VIDEO IN 1-6: Connect Video Inputs 1-6 to composite-	12	CD, AUX, TUNER Inputs: Connect to stereo analog outputs of audio
	video from source components (see "Source Setup," below).		components.
2	COMPOSITE VIDEO OUT 4-6 OUT; MON OUT: Connect to	13	TAPE MONITOR IN/OUT: Connect OUT to the stereo analog inputs,
	composite-video record-inputs of recording components; connect		and IN to the outputs of an audio recording components such as a
	MON OUT to the composite-video input of the video monitor/TV.		cassette deck or CD recorder, or of an analog audio processor such as
3	S VID1 IN - S VID6 IN: Connect Video Inputs 1-6 to S-Video from		a stereo equalizer.
	source components (see "Source Setup," below).	14	MULTISOURCE OUT: Connect to the inputs of the stereo amplifier
4	S VID4 OUT - SVID6 OUT; MON OUT: Connect to S-Video record-		(integrated amp, receiver) that will power the remote-zone's
	inputs of recording components; connect MON OUT to the S-Video		loudspeakers (see "Listening in a Remote Zone," below).
	input of the video monitor/TV.	15	PREAMP ANALOG 7.1 OUTPUTS: Connect L, R, and CENTER to the	GB
5	COMPONENT VIDEO IN (upper), OUT (lower): Connect inputs to		channel inputs of the power amplifier(s) driving the front, channels;
	component-video signal or wide-band component video from a		connect LS and RS to the power amplifier driving the surround
	source component such as a DVD player or HDTV tuner; connect		speakers and LEFT B and RIGHT B to that driving the surround-back
	outputs to the component-video inputs of the video monitor/TV. Be		speakers (if any); connect sub to the line input of a powered
	sure to observe consistency in connecting the Y, CB, and CR jacks to		subwoofer or to the amplifier driving a passive sub (if any).
	the corresponding sources/inputs (see "Source Setup," below).	16	EXTERNAL 5.1 INPUTS: Connect to the corresponding analog audio
6	NAD LINK IN/OUT: Connect to the corresponding NAD Link jacks		outputs of a multichannel source component such as a DVD-Audio or
	(input to output and vice versa) of compatible NAD components (see		multichannel SACD player. There is no bass-management or other
	"NAD Link," below).		processing available to these inputs; see "Selecting Sources," below.
7	DIGITAL 1-3; DIGITAL IN; DIGITAL OUT: Connect DIGITAL 1-3 to	17	12V TRIGGERS: Connect to the 12-volt trigger inputs of compatible
	coaxial S/PDIF-format digital sources such as CD or DVD players;		components such as power amplifiers and projector lifts; see "Trigger
	connect DIGITAL IN to a high-quality S/PDIF-format source via BNC		Setup," below.
	cabling; connect DIGITAL OUT to the coaxial S/PDIF digital input of a	18	AC power inlet: Connect to the supplied IEC-standard removable
	recording component such as a CD recorder, DAT deck, or computer		AC power cord or a compatible cord.
	soundcard (see "Source Setup," below).

8OPTICAL DIGITAL IN 1-2; DIGITAL IN; OPTICAL DIGITAL OUT: Connect OPTICAL DIGITAL 1-2 to optical S/PDIF-format digital sources such as CD or DVD players; connect OPTICAL DIGITAL OUT to the optical S/PDIF digital input of a recording component such as a CD recorder, DAT deck, or computer soundcard.

11