CONNECTING AT DSC MODE
1 | 01 | 0204 |
|
| 03 |
2 | (USB) socket |
|
|
|
|
| |
DC IN 3Vsocket | USB | PC | |
|
| ||
Camera |
| socket | |
|
|
Camera Operation | PC Operation |
i FinePixViewer automatically starts up.
1Load a SmartMedia containing photographed images into your camera.
2Slide the Power switch to the right to switch the camera on.
3Set the “USB MODE” setting in the
4Slide the Power switch to the right again to switch the camera off.
●! You should use the AC power adapter when the camera is connected to your PC (➡P.22, 91). Loss of power during
84data transmission can prevent successful data downloading.
1Switch your PC on.
2Use the special USB cable to connect the camera to your PC.
3Switch the camera on.
If you are using a Windows PC, the driver settings are specified automatically when installation is completed. No further action is required.
✽If your PC fails to recognize the camera, refer to the Software Quick Start Guide.
Always use the prescribed procedure when disconnecting or switching off the camera (➡P.88).
●! On Windows XP and Mac OS X, you must specify the automatic launch settings the first time you connect the camera to your computer (➡Software Quick Start Guide booklet).
●! Take care to connect the plugs on the special USB cable into the correct sockets, and ensure that the plugs are inserted firmly.
i The viewfinder lamp alternately blinks green and orange while the camera is communicating with your PC.
i “DSC” appears on the screen.
i The camera does not automatically switch off when a USB connection is being used.
●! Switch the camera off when you change the SmartMedia (➡P.88).
●! Do not disconnect the USB cable when the camera is communicating with the PC. See P.88 for information on the disconnection procedure.
✽Screen for Windows 98SE
iA removable disk icon appears and you can use your PC to transfer files to and from the camera.
WindowsMacintosh
If the above operations do not occur, you do not have the required software programs or drivers installed on your PC. Refer to the Software Quick Start Guide booklet and complete the 8 required PC setup procedures. Then reconnect
the camera to your PC.
85