FujiFilm 30i LCD Monitor BRIGHTNESS/VOLUME, Set-Up Set-Up, Using SET-UP, SET-UP menu options

dLCD MONITOR BRIGHTNESS/VOLUME

1	2	01	02
	1Use “d” or “c” to adjust the LCD monitor
	brightness or speaker volume.
	2Press the “MENU/OK” button to confirm the
	adjustment.

SET–UP SET–UP

■ SET–UP menu options							Using SET–UP
Settings	Display	Factory		Explanation
		default					01	02
			This is a function that
			reduces		power
			consumption and then
POWER	ON/		automatically switches
		OFF	the	camera	off	to
SAVE	OFF
			prevent battery depletion
			when the camera is not
			being used. See P.82 for
			details.
USB MODE	DSC/	DSC	See P.83 for details.
	PC CAM
			You can use this to set
DATE/TIME	SET 3	—	the date and time. See
			P.20 for details.
			This setting selects the
	LOW/		volume of the beep
-

When you use the “LCD BRIGHTNESS” or “VOLUME” settings, an “adjustment bar” appears on the LCD monitor.

●! The volume can be set when the Mode switch is set

80to “3”.

●! To exit this procedure without changing the settings, press the “BACK” button.

The volume setting can be used to adjust the camera speaker volume. The headphone volume is adjusted from the remote controller (during music playback and audio recording playback).

BEEP	HIGH/	LOW	emitted by the camera		If you selected “SET–UP”, the “SET–UP” screen
	OFF		during	camera	appears.
			operation.		1Use “a ([)” or “b (])” to select the desired	7
	ENGLISH/		Select English or French		setting.
LANGUAGE		ENGLISH	as the language used		2Use “d” or “c” to change the setting.
	FRANCAIS
			for screen display.
					Press the “MENU/OK” button to exit set-up.

●! For “DATE/TIME” press “c”. 81