FujiFilm 30i manual Specifications

Notes on the SmartMedia™

Warning Displays e In Music mode, nothing is displayed on the LCD monitor.

h Do not carry SmartMedia in locations such as a trouser pocket. This could subject the SmartMedia to excessive force when you sit down, thereby damaging the SmartMedia.

h The SmartMedia may feel warm when it is removed from the camera after extended periods of picture taking or image viewing. This is normal and does not indicate a fault.

h Inserting a SmartMedia that is charged with static electricity into your camera may result in a camera malfunction. If this occurs, switch the camera off and then on again.

h Affix the label onto the designated area of the card. Do not use third-party labels as this can lead to problems when the card is inserted or removed.

h When you attach the label, take care that it does not cover any of the write-protect area.

h Always use the camera to erase image data on a SmartMedia.

hTo edit image data, copy the image data to the PC’s hard disk and then edit the copied data.

Be sure to use your PC’s disk eject function (right-click the removable disk icon in the “My Computer” window and then click “Eject”) when you eject a SmartMedia from the PC card reader or PC card adapter.

When you are using a USB connection, you should also select and left-click the eject button for “USB disc/mass storage” in the taskbar.

If you do not use the correct eject procedure, the SmartMedia may be damaged due to write- behind cashing.

Warning Displayed			Explanation	Remedy
LCD Monitor		Remote
		Controller
	(Lit red)		The batteries in the camera are fully	Replace the batteries or have new batteries
			depleted or very low on charge.	ready.
	(Blinking red)
			There is no SmartMedia loaded or a	Load the SmartMedia (3.3V) in the correct
			5 V SmartMedia is loaded the wrong	direction.
			way round.

•The SmartMedia is not formatted. • Wipe the contact area on the SmartMedia with

• The SmartMedia contact area is	a soft dry cloth. It may be necessary to format
soiled.	the SmartMedia. If the error message is still
	displayed, replace the SmartMedia.
• Camera fault.	• Contact your FUJIFILM dealer.

■Notes on Using SmartMedia with a PC

■Specifications

•The SmartMedia contact area is • Wipe the contact area on the SmartMedia with

soiled. a soft dry cloth. It may be necessary to format

h If you intend to take photos using a SmartMedia that has been used on a PC, format the SmartMedia on your camera.

h When you format a SmartMedia in the camera and then shoot and record images, a directory (folder) is automatically created. Image data is then recorded in this directory.

h Do not change or delete the directory (folder) names or file names on the SmartMedia from your PC as this will make it impossible to use the SmartMedia in your camera.

Type

Operating voltage Conditions for use

Dimensions

Image memory card for digital cameras (SmartMedia)

3.3V

Temperature:

0°C to +40°C (+32°F to +104°F) Humidity:

80% or less (no condensation)

37 mm ⋅ 45 mm ⋅ 0.76 mm

(1.45 in. ⋅ 1.77 in. ⋅ 0.03 in.) (W ⋅ H ⋅ D)

• The SmartMedia is damaged.	the SmartMedia. If the error message is still
• The SmartMedia format is incorrect.	displayed, replace the SmartMedia.
• Camera fault.	• Contact your FUJIFILM dealer.
The SmartMedia is fully recorded.	Erase some images or use a SmartMedia that
	has ample free space.
The SmartMedia is write-protected.	Use a SmartMedia that is not write-protected.

98 99