Elmo P100 OSD On-Screen Display, Camera Mode Menu when camera image is in display

PART NAMES AND FUNCTIONS

ENGLISH

OSD (On-Screen Display)

The menu items displayed/selected on the monitor or the projection screen are referred to as "OSD (On-Screen Display)".

When the [MENU] button on the wireless remote control is pressed, the OSD menu appears on the monitor screen. (When this [MENU] button is pressed again, the OSD menu disappears.)

Move to the item to be set by pressing the [ ] direction buttons on the wireless remote control, and press the [ENTER] button to fix the setting. When the [ ] direction button is pressed, the OSD menu hierarchy is traced back. When the same button is pressed on the first hierarchy, the OSD menu disappears.

Sample image of the top and 2nd hierarchies

Brightness	Auto
Mode	Manual
White Balance
R-Gain	2nd hierarchy
B-Gain
Edge Effect
Gamma
Guide
Top hierarchy

■Camera Mode (Menu when camera image is in display)

	Name	Function
Top hierarchy	2nd hierarchy
Brightness	Auto	To vary the degree of brightness automatically according
(Brightness)		to the object	P.87
	Manual	To fix the image brightness to any level	P.87
Mode	Text3	Text1, Text2 and Text3 are used to display B&W characters and documents
(Mode)	Text2	sharply. The larger the number affixed to Text is, the larger the effect is.
	Text1	Graphics is used to display color figures and photographs
	Graphics	cleanly. Only when Graphics is selected, Edge Effect and
		Gamma can be set.
White Balance	Auto	To set the white balance to automatic following
(White Balance)	One-Push	To set the white balance to fix
	Manual	To adjust the red intensity and the blue intensity manually
R-Gain	(Displayed in level bar form)	To adjust the red intensity when the white balance is set to manual
B-Gain	(Displayed in level bar form)	To adjust the blue intensity when the white balance is set to manual
Edge Effect	3	This can be set only when the mode is set to Graphics.
(Edge Effect)	2	Edge enhancement is provided to the image to make it
	1	sharp. The larger this number is, the larger the effect is
	Off
Gamma	High	To set the gamma curve when the mode is set to Graphics
(Gamma)	Normal	The grayscale can be varied as you like.
	low
USB Mode	Mass Storage (Transfer)	To transfer the data from an SD card into the USB-
(USB Mode Select)		connected PC	P.79
	Application (Application)	To control the main unit from the USB-connected PC or
		transfer image into the PC	P.78
Guide	On	To set whether the operation status of the main unit should
(Guide)	Off	be displayed.
Video Out	All Mode (All mode)	To output the [VIDEO OUT] terminal signal according to
(Video Output Set)		all video switching
	Camera & SD	To limit the switching of the [VIDEO OUT] terminal output
	(Image of Camera & SD only)	to the camera video and the SD mode
Call (Setup call)	Default	To reset to the default factory-setting (Excluding USB Mode and Flickerless)

63