Elmo P100 instruction manual Lighting, This camera is equipped with material illumination

Page 32

ENGLISH

5 VARIOUS FUNCTIONS AND OPERATIONS

Lighting

Front operating panel

Wireless remote control

VARIOUS FUNCTIONS AND OPERATIONS

This camera is equipped with material illumination

Wireless remote control

for presenting materials, such as printed matter, and

 

base illumination for transparent materials, such as

 

slide films and negative films.

 

When the [

LAMP] button on the front operating

 

panel or wireless remote control is pressed, the

 

fluorescent lamp lights up in 1 – 3 seconds.

 

•Each time the [

LAMP] button is pressed, the

 

material illumination lights up the base illumination lights up both illuminations go out in this order.

Both the material illumination and the base illumination cannot be extinguished together.

The illumination lamp helps obtain sharp display with good color rendering when it is used for a material surface with low brightness or for a three-dimensional object.

81

Image 32 Contents
P100 Important Safeguards Should be moved with care. Quick Risk Electric Shock Do not Open Wash hands after handling Before YOU USE 30%~85% No condensationPart Names Setting UP Storing Operation Procedure Functions Contents Troubleshooting Part Names and Functions Name of Each PartAppearance Front Rear/Side FrontFunctions Front Operating PanelName Function Use this button to display materials such as documentsRear Panel NameTo enable the image transfer or the main unit control by Side PanelCamera Mode Menu when camera image is in display OSD On-Screen DisplaySD Mode Menu when image stored in an SD card is in display Sample image of the 1st, 2nd and 3rd hierarchiesIndicates the factory settings Wireless Remote Control @4 @5 @6 @72adjustment Dark To darken the camera image @0Text Text Mode To switch the mode to Text1To switch ON/OFF the lighting Normal NormalBattery Change Receivable RangeRelease the lock by turning the security lock Setting UPSetting Up English Connecting of Video Cables Connecting to the PC with a USB cableConnecting to the unit having the DVI input terminal Connecting to the unit having the analog RGB input terminalPin assignment GNDSlides down and the lamp column also folds StoringStoring Operation Procedure Presentation by Using Documents, Films, etcZoom on the front operating panel or the zoom button Press the Brightness ·Presentation using optional SD card Option Saving the Image Displaying the imageMovement as shown in the right figure Direction buttons Formatting the SD card Deleting the Image Slide show Set USB Mode to Application on the OSD 100ELMO IMAG0001.JPG IMAG0002.JPGShooting off the stage Forward shooting Backward shootingLighting This camera is equipped with material illuminationZoom Cannot be switched to RGB in image Image SelectionVGA1 VGA2VGA3 SXGA1Auto Focus Focus on the object is adjustedFocus Manual Focus Brightness Adjustment Auto Brightness AdjustmentManual Brightness Adjustment Normal is selected in Brightness onCalling State PresettingPresetting RS-232C Specifications Cable ConnectionConnect this product to a PC with an RS-232C cable This product side DSUB-9PData Format Specification Operation Command PC → This productResponse Data Format This product → PC ACKTransmission Specifications Uart Communication FormatBWD TEXT1 TEXT2 TEXT3 ConnectionGraphics Replacement of Lighting Lamp Fluorescent Lamp TroubleshootingSymptoms and Confirmation Specifications GeneralAnalog RGB output Vp-p 75Ω unbalanced Main Camera50Ω Terminated Trademark Acknowledgements Supplied AccessoriesLighting