Elmo P100 instruction manual Connection, Graphics, TEXT1 TEXT2 TEXT3

ABOUT RS-232C

ENGLISH

Function	Command		Parameter	Data		Contents
Image rotation	RO	0 (0°)		■■	To turn the image
		1	(180°)
Edge effect	AP	0 (OFF)		■■	To set the edge enhancement
		1	(Low)
		2	(Mid)
		3	(High)
White balance	AW	0 (Manual)		■■	To switch the white balance mode
		1	(Auto)
		2	(One Push)
		3	(R_Up)
		4	(R_Down)
		5	(B_Up)
		6	(B_Down)
Text	CT	0 (GRAPHICS)		■■	To set the contrast
		1	(TEXT1)
		2	(TEXT2)
		3	(TEXT3)
Posi/Nega	NP	0 (Posi)		■■	To set the Posi/Nega
		1	(Nega)
Color/B&W	CB	0 (Color)		■■	To set the Color/B&W
		1	(B&W)
Local lockout	LL	0 (OFF)		■■	To invalidate the operation of the front operating
		1	(ON)		panel and wireless remote control
Default	DF	0		■■	To reset to the default settings
Status request	QS	0		■■	To inquire about the unit state
		2
ROM version	QR	0		■■	To inquire about the ROM version
		1
		2
		3
		4
ACK check	SA	0 (OFF)		■■	To switch the ACK check mode
		1	(ON)
CR addition	SC	0 (OFF)		■■	To switch the CR addition settings
		1	(ON)

For "■■" in the data column, transmit the SPACE [20H] twice.

Connection

If the RS-232C cable is not connected correctly between this product and the PC, no acknowledgement is transmitted.

Connect the RS-232C cable correctly, and fix it firmly with the connector set screws before starting the operation.

93