Elmo P100 instruction manual Manual Focus

Page 37

ENGLISH

■ Manual Focus

Wireless remote control

When the focus button [FOCUS · NEAR] or [FOCUS · FAR] on the wireless remote control is pressed, the height on which the camera is focused changes.

This function is used for focusing the camera on any portion of a 3D object or the like.

Limit of focus adjustment:

 

 

 

 

 

• With close-up lens

 

 

 

 

 

TELE (Telescopic)

: 250 – 410mm (9.8 – 16.1 in) from close-up lens

WIDE (Wide-angle)

: 85 – 410 mm (3.3 – 16.1 in) from close-up lens

• Without close-up lens

 

∞

(19.7 in – ∞) from zoom lens

TELE (Telescopic)

: 500mm –

WIDE (Wide-angle) : 100mm –

∞

(3.9 in –

∞

) from zoom lens

 

 

VARIOUS

FUNCTIONS

AND OPERATIONS

86

Page 36 Page 38
Image 37
Page 36 Page 38
Contents
P100 Important Safeguards Should be moved with care. Quick Risk Electric Shock Do not Open Wash hands after handling 30%~85% No condensation Before YOU USEPart Names Setting UP Storing Operation Procedure Functions Contents Troubleshooting Name of Each Part Part Names and FunctionsAppearance Front Rear/Side FrontFront Operating Panel FunctionsName Function Use this button to display materials such as documentsName Rear PanelSide Panel To enable the image transfer or the main unit control byOSD On-Screen Display Camera Mode Menu when camera image is in displaySample image of the 1st, 2nd and 3rd hierarchies SD Mode Menu when image stored in an SD card is in displayIndicates the factory settings @4 @5 @6 @7 Wireless Remote Control@0Text Text Mode To switch the mode to Text1 2adjustment Dark To darken the camera imageTo switch ON/OFF the lighting Normal NormalReceivable Range Battery ChangeSetting Up Setting UPRelease the lock by turning the security lock English Connecting to the PC with a USB cable Connecting of Video CablesConnecting to the unit having the DVI input terminal Connecting to the unit having the analog RGB input terminalGND Pin assignmentStoring StoringSlides down and the lamp column also folds Presentation by Using Documents, Films, etc Operation ProcedureZoom on the front operating panel or the zoom button Press the Brightness ·Presentation using optional SD card Option Displaying the image Saving the ImageMovement as shown in the right figure Direction buttonsSlide show Deleting the ImageFormatting the SD card Set USB Mode to Application on the OSD IMAG0002.JPG 100ELMO IMAG0001.JPGForward shooting Backward shooting Shooting off the stageThis camera is equipped with material illumination Lighting Zoom Image Selection Cannot be switched to RGB in imageVGA2 VGA1VGA3 SXGA1Focus Focus on the object is adjustedAuto Focus Manual Focus Auto Brightness Adjustment Brightness AdjustmentManual Brightness Adjustment Normal is selected in Brightness onPresetting State PresettingCalling Cable Connection RS-232C SpecificationsConnect this product to a PC with an RS-232C cable This product side DSUB-9POperation Command PC → This product Data Format SpecificationResponse Data Format This product → PC ACKUart Communication Format Transmission SpecificationsBWD Graphics ConnectionTEXT1 TEXT2 TEXT3 Symptoms and Confirmation TroubleshootingReplacement of Lighting Lamp Fluorescent Lamp General Specifications50Ω Terminated Main CameraAnalog RGB output Vp-p 75Ω unbalanced Lighting Supplied AccessoriesTrademark Acknowledgements
Top Page Image Contents