D-Link DCS-1000W manual Software Installation, Web Configuration, Main Menu Image

Software Installation

Web Configuration

The Internet Camera must be configured through its built-in, Web-based Configuration.

From the web browser, enter the default IP address (192.168.0.20) to access the Welcome screen of the Internet Camera. To configure your Internet Camera type “http://192.168.0.20” in the address box of your favorite Web Browser. The number is the default IP address of your Internet Camera. Press Enter.

Note:

The PC’s IP address must correspond with the Internet Camera’s IP address in the same segment (i.e. PC=192.168.0.5, Camera=192.168.0.20) for the two devices to communicate. For instructions on how to do this, please access instructions for installing any of the D-Link Broadband Gateway products from support.dlink.com/products. The DI-713 or DI-714 are good products to use as an example as their Quick Install Guides are the most up- to-date.

Main Menu Image

After the default IP address is entered from the browser, the Internet Camera Home screen will appear with a still image. There will be three options to choose from to set-up and view your Internet Camera and they are as follows:

ƒView Image – ActiveX Mode

ƒView Image – Java Mode

ƒSystem Administration

15