Click on DateTime in the system administration menu bar and the DateTime screen will appear as illustrated below:
DateTime:
Select Synchronized with Time Server and the time will be based on the GMT setting. The time will be synchronized every 10 minutes. This is also the default setting for the Internet Camera.
IP Address:
Enter the IP Address of the Time Server in this field.
Protocol:
Two options of NTP or Time are available for your selection to link with the Time Server. The default setting is NTP.
TimeZone:
The System administrator must select the time zone for the region. Please refer to the appendix for the time zone selection table.
To set the DateTime manually select Set Manually. The system administrator must then enter the Date and Time in the respective field manually.
When you select Set Manually, each time the Internet Camera is powered off and on you must
27