The default setting for the Encryption Key is Disable. Therefore, to secure the wireless transmission be sure to Enable the Encryption Key by entering the relevant data.
Note:
Carefully input the Encryption Code, any error setting the code will cause the communication link to fail.
LED Control:
The LED control allows you to setup the LED illumination as desired. This feature provides the flexibility when surveillance activity is ON.
There are three options as follows:
Normal
Power - Steady On of the LED indicator.
LAN/WLAN - Steady On of the LED indicator. When LAN/WLAN activity is present the LED indicator will flash steadily.
OFF
Power - LED indicator is off
LAN/WLAN – LED indicator is off
Dummy
Power - Steady On of the LED indicator.
LAN/WLAN - Steady On of the LED indicator with random flashing.
Note: The WLAN LED is only available on the Wireless Internet Camera
The default setting for the LED control is Normal. When you have configured the LED control the correct illumination will set in after 1 minute.
Note:
This function is
Loading ActiveX From:
This field is used to specify the location of Xplug Control (ActiveX)
22