Elation Professional 250 Switch 16 bit/8 bit, Pan degree select, Mic Sensitivity, Reset

4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

- Switch 16 bit/8 bit

With this function you can switch the device from 16 bit to 8 bit resolution.

1.Select “16BI” by pressing [UP] or [DOWN] button.

2.Press [ENTER], the display shows “ON” or “OFF”.

3.Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t.

5. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

- Pan degree select

With this function you can select pan angle 6300 or 5400.

1.Select “DEGR” by pressing [UP] or [DOWN] button.

2.Press [ENTER], the display shows “630” or “540”.

3.Press [UP] to select “630” or press [DOWN] button to select“540”.

4.Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

Mic Sensitivity

With this function you can adjust the mic sensitivity

1.Select “MIC” by pressing [UP] or [DOWN] button

2.Press [ENTER], the display shows “M-xx”, XX stands for 0-90(the default setting is 70).

3.Press [UP] or [DOWN] to set the desired value for Mic Sensitivity

4.Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

- Automatic Run by no DMX

With this function you can run the automatic program of the device by no DMX.

1.Select “AUTO” by pressing [UP] or [DOWN] button.

2.Press [ENTER], the display shows “ON” or “OFF”.

3.Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t.

4.Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

Sound Run by no DMX

With this function you can run the sound controller of the device. by no DMX

1.Select “SOUN” by pressing [UP] or [DOWN] button.

2.Press [ENTER], The display will show “ON” or “OFF”

3.Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t.

4.Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

Fans mode select

With this function you can select the fan’s speed of the device

1.Select “FANS” by pressing [UP] or [DOWN] button

2.Press [ENTER], The display will show “HIGH” or “AUTO”(the default setting is AUTO)

3.Press [UP] to select “HIGH” if you wish to enable this function or press [DOWN] button to “AUTO” if you don’t.

3.Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu

- Reset

With this function you can Reset the device via the Control Board.

1.Select “REST” by pressing [UP] or [DOWN] button.

2.Press [ENTER] to reset or Press [MODE/ESC] to return to the main menu.

14 DESIGN WASH 250 USER MANUAL V1.0 NR