FireStore FS-3 User Guide
MOUNTING TO A CAMCORDER
The FireStore
Mounting to Anton/Bauer,
To mount to camcorder's featuring either an Anton/Bauer,
1)Remove any connected battery from the camcorder's battery mount plate.
2)Connect the
3) Attach the battery to the rear of the
Mounting to NP Battery Equipped Camcorders
To mount to camcorder's featuring NP battery systems, do the following:
1)Remove and disconnect the attached battery system from the camcorder. Consult either your camcorder's documentation or documentation from your battery system for more detailed information on removing the battery system. Leave any existing rubber gasket between the camcorder and battery system in place.
2)Mount the NP adapter plate to the rear of the camcorder with the supplied four screws (the plate mounts to the rear of the camcorder utilizing the same mount holes the NP battery case mounts to).
PAGE 9