FireStore FS-3 User Guide
Repair Disk
REPAIR allows the user to select either CHECK DISK or CURRENT CLIP.
CHECK DISK scans the entire volume for any errors (usually, if a disk was corrupted during a recording due to sudden power loss, check disk will alert the user of this). To exit check disk, press either NO or EXIT.
If an error is found, the user will be prompted to repair the file. File repair only takes a few moments to complete in most cases.
CURRENT CLIP does a similar function, but on the selected clip only. If an error is found,
File Name
File Name displays the base file name of the selected clip.
Factory Reset
When this function is selected,
factory reset. Pressing EXIT or NO will exit from menu. Warning: Factory Reset is
not
PAGE 32