FOCUS Enhancements FS-3 manual Audio Correction Settings, Folder Pref, Utilities Menu

FireStore FS-3 User Guide

User simply selects the Mode. Highlighted mode is current mode after exit. Pressing EXIT will exit back to the menu screen.

Audio Correction Settings

This menu allows the user to change the AUDIO CORRECTION setting on FS-3. User simply selects the Mode. Pressing EXIT will exit back to the menu screen.

AUDIO CORRECTION modes is an advanced feature of FS-3. It is recommended that the customer uses the factory default settings for most operations (Factory default

is MEDIUM). Audio Correction Mode allows the user to alter the performance of the audio error corrector while recording. It is useful when recording to FS-3 from tapes with lots of dropouts. Error correction will only effect AVI 2, Canopus AVI, Matrox AVI, QuickTime and AVID OMF. It does not effect RawDV

or AVI 1. The modes are:

OFF - No audio correction.

MEDIUM (default) - For “normal” clean tape played back on camcorder or other VTR with clean heads. Experiences occasional very short audio mutes.

HIGH - For cases where there are visible picture disturbances and likely long audio dropouts (1/2 sec and up).

Folder Pref

The FS-3 KEEPER PREFERENCE folder allows use of a single KEEPER folder or multiple SCENE MARKING folders. The highlighted preference is selected on EXIT. See SCENE MARKING section on page 33 of this User Guide for more details.

UTILITIES MENU

The UTILITIES MENU allows various utility functions of FS-3 to be set. User simply selects the Utilities Item. Pressing SEL will open the sub menu. Pressing EXIT will exit back to the menu screen.

Available items in the UTILITIES MENU are:

ORGANIZE FOLD

ORGANIZE OMF

DELETE CLIP

FORMAT

PARTITION

REPAIR

FILE NAME

FACTORY RESET

PAGE 29