Minolta dimage7, Dimage 5 instruction manual Display Controls Playback Mode

PLAYBACK MODE

DISPLAY CONTROLS - PLAYBACK MODE

Located on the back of the camera, the display-mode switch and the display- information button control on which monitor the image is displayed and the display format. The three position switch allows the choice between automatic display and setting the display to the EVF or LCD monitor.

Auto display - the camera will automatically change between displaying the image in the EVF and on the LCD monitor. The EVF’s eye sensors monitor if the EVF is being used and switches the display location accordingly.

EVF display - the image will only be displayed in the electronic viewfinder. Under bright-light, the EVF is easier to see than the LCD monitor.

LCD monitor display - the image will only be displayed on the LCD monitor.

In the center of the display switch, the display-information button controls the display format. Each time the button is pressed, the display cycles through to the next format: full display, image only, index playback.

Full display Image only

Index playback

In index playback, the left/right keys of the controller will move the yellow border to the next or the previous image. When the image is highlighted with the border, the date of recording, the lock and printing status, and the frame number of the image are displayed at the bottom of the screen. The highlighted image can be deleted using the QV/delete button (p. 95). When the display information button is pressed again, the highlighted image will be displayed in the single-frame playback mode. A nine or four image index can be displayed. The index-playback format can be changed in the basic section of the playback-mode menu (p. 102).

98 99