SETUP MODE
SETUP MENU - BASIC
The basic section of the setup menu allows changes to be made to the operation of the camera as well as the ability to format CompactFlash cards.
EVF AND LCD MONITOR BRIGHTNESS
The brightness of the EVF and LCD monitor is set independently of each other. Brightness is controlled in five levels from 1 (low) to 5 (high). As each setting is high- lighted, the monitor will adjust accordingly; the controller must be pressed to set the highlighted level. When the LCD brightness or EVF brightness setting is selected, the corresponding monitor will activate automatically.
FORMATTING COMPACTFLASH CARDS
When a CompactFlash card is formatted, all data on the card is erased.
The formatting function is used to erase all data on a CompactFlash card. Before for- matting a CompactFlash card, copy the data to a computer or storage device. Locking images will not protect them from being deleted when the card is formatted. Always for- mat the CompactFlash card using the camera; never use a computer to format a card.
When the format option is selected and entered, a confirmation screen will appear. Choosing “Yes” will format the card, choosing “No” will cancel the formatting operation. A screen will appear to indicate the card has been formatted; press “OK” to return to the setup menu.
If the
AUTO POWER SAVE
The camera will turn off the EVF and data panel to conserve battery power if no opera- tion is made within a certain period. The length of this period can be changed to 1, 3, 5, or 10 minutes. The
When the camera is connected to the computer, the
BEEP
The audio signal can be turned off or on. The tone of the signal can be changed to high or low.
LANGUAGE
The language used in the menus can be changed.
116 | 117 |