Minolta dimage7, Dimage 5 Connecting to Windows, Automatic Installation, Manual Installation

DATA-TRANSFER MODE

CONNECTING TO WINDOWS 98

The driver needs only to be installed once. If the driver cannot be installed automatical- ly, it can be installed manually with the operating system’s add-new-hardware wizard; see the instructions on the following page. During installation, if the operating system requests the Windows 98 CD-ROM, inset it into the CD-ROM drive and follow the accompanying instructions on the screen.

AUTOMATIC INSTALLATION

Before connecting the camera to the computer, place the DiMAGE soft- ware CD-ROM in the CD-ROM drive. The DiMAGE installer menu should automatically activate. To automatically install the Windows 98 USB driver, click on the starting-up- the-USB-device-driver-installer but- ton. A window will appear to confirm that the driver should be installed; click “Yes” to continue.

When the driver has been success- fully installed, a

window will appear. Click “OK.” The cam- era can now be attached to the computer (p. 124).

126

MANUAL INSTALLATION

To install the Windows 98 driver manually, follow the instruction in the connecting-the- camera-to-a-computer section on page 124.

When the camera is plugged into the com- puter, the operating system will detect the new device and the add-new-hardware- wizard window will open. Place the DiMAGE software CD-ROM in the CD- ROM drive. Click “Next.”

Choose the recommended search for a suitable driver. Click “Next.”

Choose to specify the location of the dri- ver. The browse window can be used to indicate the driver location. When the location is shown in the window, click “Next.”

• The driver should be located in the CD- ROM drive at :\Win98\USB.

(Continued on the next page) 127