Formatting the SD Card
After you install an SD card for the first time, you should first format the SD card with the camera. Formatting removes all information that existed previously on the SD card.
1.Set the Mode switch to any operation mode.
2.Press the MENU button.
3.Use the 
/
arrow buttons to enter Setup menu mode (
).
4.Use the 
/
arrow buttons to select ”FORMAT”.
When selected, the “OK?” setting appears as well and is highlighted in red, allowing you to format the installed SD card.
5.Press the Shutter (OK) button.
A screen appears to allow you to format the installed SD card or to cancel.
6.Use
The SD card is formatted.
When formatting is completed, the LCD screen returns to the selected mode screen.
$