Microtek MKT-1300a manual Copying to the SD Card, Selecting the Frequency, Auto Power Saving

Copying to the SD Card

COPY TO SD enables you to copy images stored in internal memory to an external memory (SecureDigital) card.

1.Enter Setup menu mode.

2.Use the 4-way arrow buttons to select ”COPY TO SD”.

When selected, the “OK?” setting appears as well and is highlighted in red, allowing you to copy images to an installed SD card.

3.Press the Shutter (OK) button.

A screen appears to allow you to copy or to cancel.

4.Use the 4-way arrow button to select “OK”, then press the Shutter (OK) button.

The images that are stored in internal memory are transferred to the installed SD card.

Selecting the Frequency

FREQUENCY allows you to match the camera’s frequency to that of the local AC power supply; select either 50 Hz or 60 Hz.

NOTE: If you have the incorrect frequency selection, pictures will have brown streaks running through them.

1.Enter Setup menu mode.

2.Use the 4-way arrow buttons to select “FREQUENCY”.

3.Use the / arrow buttons to toggle between “50HZ” and “60HZ”.

4.Press the MENU button to confirm the setting and exit the Setup menu.

Auto Power Saving

PWR SAVING enables you to set the camera to turn off automatically when it is idle for a fixed amount of time so as to conserve battery power. If the camera turns off automatically, press the POWER button to resume use.

1.Enter Setup menu mode.

2.Use the 4-way arrow buttons to select “PWR SAVING”.

3.Use the / arrow buttons to toggle between “YES” and “NO”.

Select “YES” to enable power saving. Select “NO” to disable it.

4.Press the MENU button to confirm the setting and exit the Setup menu.

""