Microtek MKT-1300a manual Appendix G Menu Items and Factory Defaults, Drive Mode

Appendix G – Menu Items and Factory Defaults

The displayed menu items differ according to the selected mode, displaying only the items that can be adjusted for that mode. In the table below, factory default settings are indicated with an asterisk (*).

Photo Menus	Options				Descriptions
SIZE	,	*,		,	2048x1536 (interpolated), 1600x1200*, 1280x960, 640x480 pixels
QUALITY	,	*,			Best, Fine*, Normal
DRIVE MODE	,				Self-timer, Single*, Continuous shot
			*,
+/- EV	, ,	*,		,	-2, -1, 0*, +1, +2
WB	*,	,		,	Auto*, Daylight, Tungsten, Fluorescent
SHARPNESS	,	*,			Low, Normal*, High
Movie/Audio Menus	Options				Descriptions
DRIVE MODE	*,				Toggles between Movie and Audio recording modes
Playback Menus	Options				Descriptions
SLIDE SHOW	OK?				Displays images in the Slide Show format
ERASE ALL	OK?				Erases all images on the internal memory and SD card
ROTATION	OK?				Rotates pictures up to 270 degrees
Setup Menus	Options				Descriptions
BEEP	ON*, OFF				Sets a beep to signal camera operation
DATE	yyyy/mm/dd				Sets the date
TIME	00:00:00 (hr/min/sec)				Sets the time
VIDEO	NTSC*, PAL				Sets the video standard
FORMAT	OK?				Formats the SD card
RESET	OK?				Returns some camera settings to the factory default values
COPY TO SD	OK?				Copies images stored on the internal memory to the SD card
FREQUENCY	50HZ, 60HZ*				Sets the power frequency to accommodate local AC power
PWR SAVING	ON*, OFF				Sets the camera to power off after two minutes of inactivity
LANGUAGE	ENG*, SC				Sets the LCD language

$"