Microtek MKT-1300a manual Selecting the Shooting Drive Mode

Selecting the Shooting Drive Mode

This mode enables you to determine how you want to shoot your still images. The following shooting drive modes are available:

• (Single): Enables you to shoot single still images. This is the default mode. (p.20)

• (Continuous): Enables you to take three still images in sequence at a single press of the Shutter button. (p.23)

• (Self-timer): Enables a 10- second delay after pressing the Shutter button before the picture is taken. (p.24)

To select the driver mode setting,

1.Set the Mode switch to (Photo).

2.Press the MENU button.

3.Use the 4-way arrow buttons to select “DRIVE MODE”, then

select from among , , or

.

4.Press the MENU button to confirm the setting and exit the menu.

5.Press the Shutter button to take the shot.

Single

Continuous

Self-timer

%