SETUP
Set The Color
System
This function allows you to automatically change tint and color coordinates for DTV programs. HDTV - High Definition Television - Use for High Vision Signal
NOTES: 1. If Color System is set improperly (does not match actual input signal), the color and tint of the main picture will be abnormal.
2.You must be tuned to VIDEO: 1 or 2 inputs and have a component hooked up to the
3.All component color type settings will affect only color component input you are currently viewing. If you are using both sets of component input jacks, be sure to set the color system feature for both inputs.
Set Virtual HD
Set Black Side
Panel
Use this feature to select between 1080i and 540p.
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in Standard mode. The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE.
NOTE: To maximize operating life of the Projection Monitor’s picture tubes when watching 4:3 signal, Black Side Panel is can- celled at Power OFF. It is recommended to watch 4:3 signal with gray side bar.
51