Daewoo 65M200, 51M200A Connecting a Component Source to Input 1 or 2 Y-PBPR

Page 19

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR.

1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the Projection Monitor below.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.

6.Press the VID1 button, to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO label disappears automatically after approximately four seconds.

FIRST TIME USE

DVI-HDTV

NOTE: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.See page 12 for tips on REAR PANEL CONNECTIONS.

19

Image 19
Contents Index Operating Guide for 51M200, 65M200, 51M200ADo not Open Important Safety InstructionsLead Notice Prevention of Screen BurnFirst Time USE AccessoriesBest HOW to SET UP Your NEW Hitachi Projection MonitorLocation ViewingPhono Connector HOOK-UP Cables and ConnectorsMagic Focus Front Panel ControlsFront Input Jacks Input Front Panel Jacks and Connectors Audio to HI-FI Output Rear Panel JacksAudio/Video Inputs 1, 2, 3 Monitor OUTDVI-HDTV Input Input Component Y-PBPRInputsRear Panel Connections Typical FULL-FEATURE Setup First Time USETips on Rear Panel Connections Rear Panel of Projection Monitor Connecting External Audio DevicesBefore Operating External Video Source Connecting External Video SourcesConnecting a Monaural Audio Source to INPUT1~INPUT5 Connecting a Stereo Source to INPUT1~INPUT5 Connecting AN S-VIDEO Source to Input 3, 4 DVI-HDTV Connecting a Component Source to Input 1 or 2 Y-PBPR Remote Control Remote ControlDAY/NIGHT button HOW to USE the Remote to Control Your Projection MonitorPower button PICTURE-IN-PICTURE buttonsAntenna button Satellite Receiver SAT Mode Only VOLUME, Mute buttonVID1 ~ VID5 Size button Button Sleep buttonInfo button Exit buttonPICTURE-IN-PICTURE PIP POP Mode PICTURE-IN-PICTUREPIP button Split Split Mode PICTURE-IN-PICTUREPIP Mode button Swap buttonSplit FREEZEwith PIP OFF Freeze button With PIP onFreeze button with PIP OFF POP SUB Freeze with PIP OFFPrecoded VCR Buttons Using the Remote to Control VCR FunctionsOperating the precoded function for your VCR DVD/VCR ButtonRemote Using the Remote to Control CABLE/SATELLITE BOX FunctionsCable CBL/SAT Button Precoded CABLE/SATELLITE BOX ButtonsOperating the precoded function for your DVD player Using the Remote to Control DVD FunctionsPrecoded DVD Buttons ON-SCREEN Display OSD Video Video Picture ModeANT A/B ContrastColor Management Reset Video SettingsPure depending on the user’s preference Noise Reduction Auto Movie ModeColor Decoding Auto ColorTreble AudioTechnology Vertical Position Aspect ModeAspect Auto AspectLocks LocksMovie Ratings TV Ratings Eng Canadian RatingsCanadian Ratings English Table Programming is not suitable for children FrnCanadian Ratings French Table + General Not recommended for youngSetup Magic Focus Tune Up Auto Digital Convergence AdjustmentTo Adjust the Convergence Manual Convergence Adjustment ModeTo Move Adjustment Point To Change the Color of Adjustment PointMenu Preference Menu PreferenceSet The Clock Menu BackgroundSet The Inputs Set Virtual HD Set Black Side Panel Set The Color SystemAbout Your TV Set ClosedCaption ChannelDo not Care of Your Aspect Projection Monitor Your Remote ControlReception Problems Useful Info SymptomsInputs Dimensions 51M200 51M200AOutputs Aspect Brand Electronics Dial Toll FreeIndex Page Page Page Page Page QR64461