Daewoo 51M200A, 65M200 important safety instructions HOOK-UP Cables and Connectors, Phono Connector

Page 6

HOOK-UP CABLES AND CONNECTORS

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.

FIRST TIME USE

Phono Connector

Used on all standard video and audio cables which connect to inputs and outputs located on the Projection Monitor’s rear jack panel and front control panel.

Digital Visual Interface (DVI) Connection Cable This cable is used to connect external devices with DVI-HDTV output capability. It delivers digital video in its native format. Audio information is carried sepa- rately.

S-Video (Super Video) Connector

This connector is used on camcorders, VCRs and laser- disc players with an S-Video feature in place of the standard video cable to produce a high quality picture.

6

Image 6

Contents Operating Guide for 51M200, 65M200, 51M200A IndexImportant Safety Instructions Do not Open Prevention of Screen Burn Lead NoticeAccessories First Time USEViewing HOW to SET UP Your NEW Hitachi Projection MonitorLocation BestHOOK-UP Cables and Connectors Phono ConnectorFront Panel Controls Magic FocusFront Input Jacks Input Front Panel Jacks and Connectors Monitor OUT Rear Panel JacksAudio/Video Inputs 1, 2, 3 Audio to HI-FI OutputComponent Y-PBPRInputs DVI-HDTV Input InputTypical FULL-FEATURE Setup First Time USE Rear Panel ConnectionsTips on Rear Panel Connections Connecting External Audio Devices Rear Panel of Projection MonitorConnecting External Video Sources Before Operating External Video SourceConnecting a Monaural Audio Source to INPUT1~INPUT5 Connecting a Stereo Source to INPUT1~INPUT5 Connecting AN S-VIDEO Source to Input 3, 4 DVI-HDTV Connecting a Component Source to Input 1 or 2 Y-PBPR Remote Control Remote ControlPICTURE-IN-PICTURE buttons HOW to USE the Remote to Control Your Projection MonitorPower button DAY/NIGHT buttonVOLUME, Mute button Antenna button Satellite Receiver SAT Mode OnlyVID1 ~ VID5 Size button Exit button Sleep buttonInfo button ButtonPOP Mode PICTURE-IN-PICTURE PICTURE-IN-PICTURE PIPPIP button Swap button Split Mode PICTURE-IN-PICTUREPIP Mode button SplitPOP SUB Freeze with PIP OFF Freeze button With PIP onFreeze button with PIP OFF Split FREEZEwith PIP OFFDVD/VCR Button Using the Remote to Control VCR FunctionsOperating the precoded function for your VCR Precoded VCR ButtonsPrecoded CABLE/SATELLITE BOX Buttons Using the Remote to Control CABLE/SATELLITE BOX FunctionsCable CBL/SAT Button RemoteUsing the Remote to Control DVD Functions Operating the precoded function for your DVD playerPrecoded DVD Buttons ON-SCREEN Display OSD Video Picture Mode VideoContrast ANT A/BReset Video Settings Color ManagementPure depending on the user’s preference Auto Color Auto Movie ModeColor Decoding Noise ReductionAudio TrebleTechnology Auto Aspect Aspect ModeAspect Vertical PositionLocks LocksMovie Ratings TV Ratings Canadian Ratings EngCanadian Ratings English Table + General Not recommended for young FrnCanadian Ratings French Table Programming is not suitable for childrenSetup Auto Digital Convergence Adjustment Magic Focus Tune UpTo Change the Color of Adjustment Point Manual Convergence Adjustment ModeTo Move Adjustment Point To Adjust the ConvergenceMenu Preference Menu PreferenceMenu Background Set The ClockSet The Inputs Set The Color System Set Virtual HD Set Black Side PanelChannel Set ClosedCaption About Your TVCare of Your Aspect Projection Monitor Your Remote Control Do notReception Problems Symptoms Useful InfoDimensions 51M200 51M200A InputsOutputs Dial Toll Free Aspect Brand ElectronicsIndex Page Page Page Page Page QR64461