Husqvarna 343R, 345RX, 343F, 345FX, 345FXT manual Fuel system, Check for wear on pins A and B

3	Fuel system
	Check for wear on pins (A) and (B).
	Replace the throttle control (C) and
	lever arm (D) if necessary.
	Check that the cables are properly
	pressed into the cut-outs (E) and that
	the throttle cable (F) is in the right
	groove.
	If necessary, attach it with silicon
	adhesive in order to facilitate assembly.
	Check that the protective bellows (G)
	are whole and that they are correctly
	mounted over the ball on the cable.
	G

Remove the bolt (A) and remove the
throttle from the handle.	Remove the bolt (A) that attaches the
Remove bolts (B) and (C).	throttle to the handle.
Separate the halves of the throttle.	Be careful not to lose the nut.
	Remove the throttle and remove bolts
	(B) and (C).
	Carefully separate the two halves of the
	throttle.

28