Husqvarna 343R, 345RX, 343F, 345FX, 345FXT manual Replacing the drive dogs, 1Starter

1Starter

Tighten the return spring.

Check the spring tension.

Mount the starter onto the engine.

Replacing the drive dogs

See chapter 2 Ignition system.

Tighten the return spring.

Lift up the starter cord when the return spring is completely loose and the cord pulled out completely.

Then turn the starter pulley anti- clockwise 7 revolutions.

Check the spring tension. With the cord completely pulled out the cord pulley should be able to be turned at least another half revolution.

Mount the starter onto the engine. Pull out the starter cord a little.

Place the starter in position and release the starter cord at the same time.

Check that the ignition cable is not trapped (see arrow).

Check that the drive dogs grip the starter pulley in the correct way.

Tighten the bolts.

Replacing the drive dogs

See chapter 2 Ignition system.

6