Yamaha RX-V559 owner manual Controlling iPod without using the OSD

USING iPod®

Once you have stationed your iPod in a YAMAHA iPod universal dock (such as YDS-10 sold separately) connected to the DOCK terminal of this unit (see page 22), you can enjoy playback of your iPod using the supplied remote control. You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts (such as the MP3 format) stored on your iPod (see page 36).

Notes

•Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.

•Compatibility with your iPod may vary depending on the software version of your iPod.

•The controls on your iPod are not operational when you operate your iPod using the OSD of this unit.

•There are some characters that cannot be displayed in the front panel or in the OSD of this unit.

•The name of the song being played appears in the front panel display up to 14 alphanumeric characters.

y

•For a complete list of the remote control functions used to control your iPod, see the “iPod” column in “Controlling other components” on page 91.

•For a complete list of status messages that appear in the front panel display and in the OSD, see the “iPod” section in “TROUBLESHOOTING” on page 105.

Setting the remote control code

You need to first assign the remote control code to V-AUX on the remote control to control your iPod when “V-AUX” is selected as the input source.

1Press V-AUX on the remote control to select “V-AUX” as the input source.

V-AUX

2Press CODE SET on the remote control using a ball point pen or a similar object.

The TRANSMIT indicator on the remote control flashes twice.

TRANSMIT

CODE SET

Flashes

Controlling iPod

Once the remote control code is assigned to V-AUX on the remote control, you can control your iPod when “V-AUX” is selected as the input source. The operations of your iPod can be done with or without the aid of the OSD of this unit.

■Controlling iPod without using the OSD

Once “V-AUX” is selected as the input source, you can perform the basic operations of your iPod (see page 91) using the supplied remote control without the aid of the OSD of this unit.

Note

Operations can be also done with the controls on your iPod.

y

For a complete list of the remote control buttons used to control your iPod, see the “iPod” column in “Controlling other components” on page 91.

3Press the numeric buttons to enter the code number “81981”.

The TRANSMIT indicator on the remote control flashes twice, and the remote control code for V-AUX is set.

STEREO	MUSIC	ENTERTAIN	MOVIE
1	2	3	4
STANDARD	SELECT	EXTD SUR.	DIRECT ST.	TRANSMIT
5	6	7	8
SPEAKERS	ENHANCER	NIGHT	STRAIGHT	Flashes
9	0	10	ENT.
			EFFECT

98