Metz NB 1018, 082 NB, 1014 083 Aerial Control Assigning LNC or polarizer values, Switch systems

Page 10

4. Aerial Control Assigning LNC or polarizer values

Depending on the type of satellite aerial you use, there are three methods of aerial control for selection of H and V polarization:

•control by means of the LNC voltage (the most common method),

•control with the aid of a magnetic polarizer,

•control with a relay.

The appropriate control method for polarization must be selected in the station table. H for horizontal polarization or V for vertical polarization is displayed in the submenu „Aerial control“ of this table.

Press this key on the remote

control

1.Call the station table and select the submenu „Chan- nel“

The screen displays

3

SAT 1

40

Aerial

44

 

Std channel

 

 

45

 

Spec. channel

 

46

 

 

 

SAT-TV

 

 

47

 

 

 

 

SAT-RADIO

H: 11,494 ARD

48

AV

49

 

Aerial control

 

3

SAT 1

40

Aerial

44

 

Std channel

 

 

45

 

Spec. channel

 

46

 

 

 

Fine tuning

 

 

47

 

 

 

48

AV

SAT-Frq.

H: 11,494 ARD

49

 

Aerial control

 

 

>> weitere Einstellungen

Explanation

The frequency setting may differ from model to model, as shown in the picture.

2.Call the submenu „Aerial control“ and set the LNC voltage

red

-

+

 

3.Make the LNC selection (required only for multi-

switch systems)

-

+

 

LNC pwr supply:

H

22 kHz signal:

On/Off

Polarizer:

1

AV Relay:

On/Off

AFC:

On/Off

6 9 6 + S 0 4 B - G B

 

store ?

 

OK

LNC pwr supply:

H

22 kHz signal:

On/Off

Polarizer:

2

AV Relay:

On/Off

AFC:

On/Off

6 9 6 + S 0 4 C - G B

 

 

store ?

 

OK

 

696ˇˇ S00

In this submenu, one of the previously set values (see sections 1 and 2 of these operating instructions) can be selected and assigned to the current SAT program position. This is done with the aid of the colored keys.

When you press the blue key, the text „LNC power supply“ is displayed on a blue background to indicate that it is active.

You can select the control voltage for either H or V

polarization with the

-

+

keys.

 

 

The setting of the control voltages is described in sec- tion 2 of these operating instructions.

Here you can superimpose a 22 kHz switching signal upon the LNC voltage for horizontal or ver- tical polarization.

This is used to select the desired input of a multi- switch system.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SAT Preface IndexLNC frequency Set the 22 kHz switching signalFor 100 Hz sets Select the first programme position SAT-programmingSet the LNC frequencies Store the stations and return to the TV pictureSAT-programming Station settingsFor 50 Hz sets Call the menu „Station set- tingsSAT programme tables Call the menu „LNC power supply Set „LNC voltage H LNC Power Supply Setting the LNC voltagesSAT settings LNC pwr supplySet „LNC voltage Store the settings Setting the LNC voltagesScreen displays Explanation SAT settings Setting the polarizer valuesPolarizer Call the station table and select the submenu „Chan- nel Switch systemsAerial Control Assigning LNC or polarizer values Call the submenu „Aerial control and set the LNC voltageSet the polarizer Set the relay control voltageKey Aerial Control SAT frequency input / station searchKey to resume the search Aerial Control Switch off AFCTV station table TV set with Sound and set the sound ModeStation table Set „Channel 1 and/or „ChannelAdjust the video bandwidth Adjust the video levelVideo level/Bandwidth Video signal is set in the factory to Fbas Decoder Operation Setting the video signalSet the video signal Store the setting and return to the TV pictureRecording SAT Programs On TV sets with 1 Euro socket Call the AV menu and define the signal pathConfirm the setting and cle- ar the menu AV-menuRecording SAT Programs On TV sets with 3 Euro sockets AV recordingEnter the data for the pro SAT Timer recordingCall the menu „SAT timer recording Gram to be recorded see ExampleSAT Radio Operation Programming radio stations Our example, the station NDR 2 uses horizontal polarisationSet the „Bandwidth Store the settings and close the menuSet the „Deemphasis Red station Radio stationsProgramming ADR ADR must be selected for an ADR stationRadio station table Call sub-menu „SAT sound settings and set the sound modeRadio stations Power consumption Technical DataAccessories TimersSAT radio stations TV station table SAT radio station tableNumber TV program positions Basically, the TV set offersAlways first class
Top Page Image Contents