Metz 081, NB 1018, 082 NB, 1014 083, NB 1010 Setting the LNC voltages, Screen displays Explanation

Page 8

Press this key on the remote

control

2. LNC Power Supply
2. LNC Power Supply			Setting the LNC voltages

The screen displays			Explanation

4. Set „LNC voltage V“

-

+

5. Store the settings

MENU return

TV TV picture

? Help

LNC pwr supply

1	2		3		LNC voltage H		On
1	2		3
4	5		6
4	5		6
7	8		9		LNC voltage V
	0				LNC voltage V		On
--/-	0

		P+
	-	OK	+
		P-
TV
MENU
?
A
B			AV
6 9 6 + S 0 2 D - G B					store ?
6 9 6 + S 0 2 D - G B						OK
						OK
MENU	return			TV	TV picture	?	Help

The supply voltage for the SAT aerial can be set to Off or to a voltage in the range of 12 V to 19 V. When the correct voltage is set, the picture from the SAT station being received on this program position appears behind the menu display.

Whenever the voltage setting is changed, a red box appears at the bottom right of the screen. When you have set the correct voltage, press the OK key to store it.

One of these two voltages can subsequently be assigned to each SAT program position. To do this, call the station

table, open the menu „Channel“ with the key and then, in the submenu „Aerial control“, select the

LNC supply voltage H or V with the	-	+	keys . See
section 4 of these instructions.

Pressing the OK key stores the values you have set.

OK

LNC pwr supply

1	2		3	LNC voltage H
1	2		3	On
4	5		6	On
4	5		6
7	8		9	LNC voltage V
	0			LNC voltage V
--/-	0			On
				On
		P+
	-	OK	+
		P-
TV
MENU
?
A
B			AV
6 9 6 + S 0 2 E - G B

6. Return to the TV picture

TV

8

Image 8

Contents SAT Preface IndexFor 100 Hz sets Set the 22 kHz switching signalLNC frequency SAT-programming Set the LNC frequenciesSelect the first programme position Store the stations and return to the TV pictureStation settings For 50 Hz setsSAT-programming Call the menu „Station set- tingsSAT programme tables LNC Power Supply Setting the LNC voltages SAT settingsCall the menu „LNC power supply Set „LNC voltage H LNC pwr supplyScreen displays Explanation Setting the LNC voltagesSet „LNC voltage Store the settings Polarizer Setting the polarizer valuesSAT settings Switch systems Aerial Control Assigning LNC or polarizer valuesCall the station table and select the submenu „Chan- nel Call the submenu „Aerial control and set the LNC voltageSet the polarizer Set the relay control voltageKey to resume the search Aerial Control SAT frequency input / station searchKey TV station table Switch off AFCAerial Control Station table Sound and set the sound ModeTV set with Set „Channel 1 and/or „ChannelVideo level/Bandwidth Adjust the video levelAdjust the video bandwidth Decoder Operation Setting the video signal Set the video signalVideo signal is set in the factory to Fbas Store the setting and return to the TV pictureCall the AV menu and define the signal path Confirm the setting and cle- ar the menuRecording SAT Programs On TV sets with 1 Euro socket AV-menuRecording SAT Programs On TV sets with 3 Euro sockets AV recordingSAT Timer recording Call the menu „SAT timer recordingEnter the data for the pro Gram to be recorded see ExampleSAT Radio Operation Programming radio stations Our example, the station NDR 2 uses horizontal polarisationSet the „Deemphasis Store the settings and close the menuSet the „Bandwidth Radio stations Programming ADRRed station ADR must be selected for an ADR stationRadio stations Call sub-menu „SAT sound settings and set the sound modeRadio station table Technical Data AccessoriesPower consumption TimersTV station table SAT radio station table Number TV program positionsSAT radio stations Basically, the TV set offersAlways first class