Metz NB 1018, 082 NB, 081 Technical Data, Accessories, Power consumption, Timers, Aerial control

Page 25

12. Technical Data


RF input range, F-socket input
Input frequency range		950 . . .2050 MHz
Input impedance:		75 Ω
Video:	Gain adjustable		-3 . . .+4dB
	Frequency range		20Hz . . .5,5 MHz

SAT signal also available at the SCART socket while viewing terrestrial programs.


Sound:	MONO / DUAL / STEREO
Sound carrier frequency:		5,00 . . . 9,99 MHz

Stadardized carrier frequencies are pre-programmed.

Channel bandwidth:

130KHz / 180 KHz / 280 KHz / 380 KHz

Deemphasis: 50 µs, 75 µs, J 17 and PANDA

Power consumption

• of the SAT module: max. 16 W

Timers

8 timers can be programmed up to two months in advance.

Aerial control
LNC voltages:	12 V . . . 19 V „Off“
	22 kHz signal On / Off
Relay supply:	On / Off
Polarizer control current	- 60mA . . .+60mA

All settings can be stored individually for each program position with the aid of menus.

The power supply sources are short-circuit proof and switch off if the load is too high. They are switched on again when the overload is removed. See also the Alignment Instructions.

13.Accessories

•Aerial positioner connection cable

7928-2 Order No. 879 28 02

•SAT-adapter (polarizer / relay) 6228-1 Order No. 862 28 01

✍

25

Image 25

Contents SAT Index PrefaceLNC frequency Set the 22 kHz switching signalFor 100 Hz sets Set the LNC frequencies SAT-programmingSelect the first programme position Store the stations and return to the TV pictureFor 50 Hz sets Station settingsSAT-programming Call the menu „Station set- tingsSAT programme tables SAT settings LNC Power Supply Setting the LNC voltagesCall the menu „LNC power supply Set „LNC voltage H LNC pwr supplySet „LNC voltage Store the settings Setting the LNC voltagesScreen displays Explanation SAT settings Setting the polarizer valuesPolarizer Aerial Control Assigning LNC or polarizer values Switch systemsCall the station table and select the submenu „Chan- nel Call the submenu „Aerial control and set the LNC voltageSet the relay control voltage Set the polarizerKey Aerial Control SAT frequency input / station searchKey to resume the search Aerial Control Switch off AFCTV station table TV set with Sound and set the sound ModeStation table „Channel Set „Channel 1 and/orAdjust the video bandwidth Adjust the video levelVideo level/Bandwidth Set the video signal Decoder Operation Setting the video signalVideo signal is set in the factory to Fbas Store the setting and return to the TV pictureConfirm the setting and cle- ar the menu Call the AV menu and define the signal pathRecording SAT Programs On TV sets with 1 Euro socket AV-menuAV recording Recording SAT Programs On TV sets with 3 Euro socketsCall the menu „SAT timer recording SAT Timer recordingEnter the data for the pro Gram to be recorded see ExampleOur example, the station NDR 2 uses horizontal polarisation SAT Radio Operation Programming radio stationsSet the „Bandwidth Store the settings and close the menuSet the „Deemphasis Programming ADR Radio stationsRed station ADR must be selected for an ADR stationRadio station table Call sub-menu „SAT sound settings and set the sound modeRadio stations Accessories Technical DataPower consumption TimersNumber TV program positions TV station table SAT radio station tableSAT radio stations Basically, the TV set offersAlways first class