Metz 1014 083, NB 1018, 082 NB, 081, NB 1010 operating instructions Preface, Index

Page 2

Preface

Dear Customer,

we congratulate you on the purchase of the SAT Upgrade Kit which enables you to receive the programs transmitted via TV satellites without the need for a separate SAT receiver and an additional remote control.

These operating instructions explain the operation of your TV set for the reception of satellite programs.

The settings for the best-known TV and radio satellite programs transmitted via the satellites ASTRA,HOTBIRD and EUTELSAT (see satellite transmitter table) have been programmed in the factory, ready for use.

Chapter „1. SAT Programming“ describes how to quickly assign the desired programs.

Your METZ-WERKE

 

Contents

 

 

Preface

. .2

 

Contents

. .2

 

Index

. .2

 

Differences in the permanent Display

. .2

1.

SAT programming

. .3

 

LNC frequency (100 Hz)

. .3

 

LNC frequency (50 Hz)

. .5

 

Transferring programs (50 Hz)

. .6

2.

LNC power supply

. .7

 

Setting the LNC voltages

. .7

3.

Polarizer

. .9

4.

Aerial control

.10

 

Assigning LNC or polarizer values

.10

 

SAT frequency input / station search

.12

 

Switch off AFC (Automatic Frequency Control)

.13

5.

SAT sound settings

.14

 

Sound mode

.14

 

Muting (for SAT radio programs)

.14

 

Bandwidth, deemphasis

.15

6.

Picture adjustment

.16

 

Video level

.16

7.

Decoder operation

.17

 

Video signal

.17

8.

Recording SAT programs

.18

9.

Timer-controlled recording of SAT programs

.20

10.

SAT radio operation

.21

11.

SAT-ADR radio operation

.23

12.

Technical data

.25

13.

Accessories

.25

14.

Program position management for SAT

.26

Index

22 kHz switching, . . . . . . . . . . . . . . . . . . . . . . . .3, 6 AFC switch off, . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Bandwidth, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Deemphasis, . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Multi-switch system, . . . . . . . . . . . . . . . . . . . . . . . . 3 Muting, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Picture signal , . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Decoder operation, . . . . . . . . . . . . . . . . . . . . . . . .17 Radio reception, . . . . . . . . . . . . . . . . . . . . . . . . . .21 Recording SAT programs, . . . . . . . . . . . . . . . .18, 19 Relay, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Station search, . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Differences in the permanent display

In TV sets with more than 200 program positions, the TV and radio program positions are managed in two separate station tables. Thisdifference is indicated as follows in the permanent display:

P01 stands for SAT-TV program position 01

R01 stands for SAT-radio program position 01

The SAT-radio station table is identified by a blue header line, while the SAT-TV station table has a red header line.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SAT Preface IndexFor 100 Hz sets Set the 22 kHz switching signalLNC frequency Select the first programme position SAT-programmingSet the LNC frequencies Store the stations and return to the TV pictureSAT-programming Station settingsFor 50 Hz sets Call the menu „Station set- tingsSAT programme tables Call the menu „LNC power supply Set „LNC voltage H LNC Power Supply Setting the LNC voltagesSAT settings LNC pwr supplyScreen displays Explanation Setting the LNC voltagesSet „LNC voltage Store the settings Polarizer Setting the polarizer valuesSAT settings Call the station table and select the submenu „Chan- nel Switch systemsAerial Control Assigning LNC or polarizer values Call the submenu „Aerial control and set the LNC voltageSet the polarizer Set the relay control voltageKey to resume the search Aerial Control SAT frequency input / station searchKey TV station table Switch off AFCAerial Control Station table Sound and set the sound ModeTV set with Set „Channel 1 and/or „ChannelVideo level/Bandwidth Adjust the video levelAdjust the video bandwidth Video signal is set in the factory to Fbas Decoder Operation Setting the video signalSet the video signal Store the setting and return to the TV pictureRecording SAT Programs On TV sets with 1 Euro socket Call the AV menu and define the signal pathConfirm the setting and cle- ar the menu AV-menuRecording SAT Programs On TV sets with 3 Euro sockets AV recordingEnter the data for the pro SAT Timer recordingCall the menu „SAT timer recording Gram to be recorded see ExampleSAT Radio Operation Programming radio stations Our example, the station NDR 2 uses horizontal polarisationSet the „Deemphasis Store the settings and close the menuSet the „Bandwidth Red station Radio stationsProgramming ADR ADR must be selected for an ADR stationRadio stations Call sub-menu „SAT sound settings and set the sound modeRadio station table Power consumption Technical DataAccessories TimersSAT radio stations TV station table SAT radio station tableNumber TV program positions Basically, the TV set offersAlways first class
Top Page Image Contents