Metz 081, NB 1018, 082 NB, 1014 083, NB 1010 Aerial Control, Switch off AFC, TV station table

Page 13

4. Aerial Control

Switch off AFC

When stations are assigned to the various programme positions, they are automatically tuned to the centre frequency. This is normally satisfactory.

If the results of this automatic tuning are unsatisfactory, you can turn off the AFC (Automatic Frequency Control) function for specific pro- gramme positions and adjust the tuning manually.

Select the programme position which is to be tuned manually.

Press this key on the remote

control

1.Call the menu „Aerial control“.

	The screen displays	Explanation
MENU return	TV TV picture	? Help The function „AFC“ is set to „On“ in the factory.

red

TV station table

	▲▼
	0	VTR1	Videorec.1
	1	ARD		Aerial
	2	ZDF		Aerial
	3	SAT	H	Aerial
	4	LNC pwr supply:	H
	4	22 kHz signal:	On/Off
	5	22 kHz signal:	On/Off
	5	22 kHz signal:	On/Off
	6	Polarizer:	2	1
	7	Polarizer:		1
	7	AV AV Relay:	On/Off
	8	Relay:	On/Off
	8	AFC:	On/Off
	9	AFC:	On/Off
		>> weitere Einstellungen
		Std, Pict., Sound
	6 9 6 + S 0 4 H - G B

This setting causes all programme positions to be tuned to the centre frequency.

2.Switch off the AFC and adjust the frequency.

	red
	red
-	+
-

	LNC pwr supply:	H
	22 kHz signal:	On/Off
	Polarizer:	1
AV	Relay:	On/Off
	AFC:	On/Off
	6 9 6 + S 0 4 F - G B

store ?

OK

696+S00ˇˇ

Call the submenu „AFC“ by pressing the red key.

Press the red key again to switch off the AFC function.

The frequency can then be adjusted with the	-	+
	-	+
keys.

When this is done, the station table is removed from the screen to permit better assessment of the picture quality.

3.Store the modified frequen- cy and return to the TV pic- ture.

Once you are satisfied with the picture, store the set- tings for this programme position by pressing the OK key.

OK

TV

13

Image 13

Contents SAT Index PrefaceLNC frequency Set the 22 kHz switching signalFor 100 Hz sets Set the LNC frequencies SAT-programmingSelect the first programme position Store the stations and return to the TV pictureFor 50 Hz sets Station settingsSAT-programming Call the menu „Station set- tingsSAT programme tables SAT settings LNC Power Supply Setting the LNC voltagesCall the menu „LNC power supply Set „LNC voltage H LNC pwr supplySet „LNC voltage Store the settings Setting the LNC voltagesScreen displays Explanation SAT settings Setting the polarizer valuesPolarizer Aerial Control Assigning LNC or polarizer values Switch systemsCall the station table and select the submenu „Chan- nel Call the submenu „Aerial control and set the LNC voltageSet the relay control voltage Set the polarizerKey Aerial Control SAT frequency input / station searchKey to resume the search Aerial Control Switch off AFCTV station table TV set with Sound and set the sound ModeStation table „Channel Set „Channel 1 and/orAdjust the video bandwidth Adjust the video levelVideo level/Bandwidth Set the video signal Decoder Operation Setting the video signalVideo signal is set in the factory to Fbas Store the setting and return to the TV pictureConfirm the setting and cle- ar the menu Call the AV menu and define the signal pathRecording SAT Programs On TV sets with 1 Euro socket AV-menuAV recording Recording SAT Programs On TV sets with 3 Euro socketsCall the menu „SAT timer recording SAT Timer recordingEnter the data for the pro Gram to be recorded see ExampleOur example, the station NDR 2 uses horizontal polarisation SAT Radio Operation Programming radio stationsSet the „Bandwidth Store the settings and close the menuSet the „Deemphasis Programming ADR Radio stationsRed station ADR must be selected for an ADR stationRadio station table Call sub-menu „SAT sound settings and set the sound modeRadio stations Accessories Technical DataPower consumption TimersNumber TV program positions TV station table SAT radio station tableSAT radio stations Basically, the TV set offersAlways first class