MOTOR DRIVE GROUP UNITS
M.AC Control Box
AC transformer for use with household current. Incorporates
aselector switch between single- frame and sequential exposure operation, a terminal for the re- lay cord and an intervalomejer.
M. 15V
This AC adapter is necessary to charge the M. 15V
250 Film Back 1;250 Film Magazine
Used with the Motor Drive 1 or Winder 2 for roll films up to 250 exposures. Two Magazines are necessary.
Relay Cords 1.2m and 10m
Extension cords between the
Motor Drive 1 and the power source for remote control.
250 Film Loader
Used in the darkroom for load- ing the 250 Film Magazine from 33m (100 ft.) bulk film rolls.
Compartment Case L
Partitioned Insert
Can be slung over the shoulder or carried by hand. If used with an optionally available partition- ed insert, the Case L accommo-
dates motor drive equipment.
M. Remote Cords 1.2m/5m
To be fitted into the remote control jack of the Motor Drive
1 and Winder.
75