FLASHBULB PHOTOGRAPHY
Plug the synchronizing cable leading from the flash unit into the camera flash socket, and then attach the flash unit to the camera.
Select the proper synchro setting from the table below according to the type of bulb be- ing used, and align the red dot on the X and FP flash selector with the "X" or "FP" in- dication alongside the flash socket.
CAUTION: With the
unit, the synchronizing cable must be used to
connect the unit and the camera.
Select the proper shutter speed from the table
below, and set the shutter speed ring accord- ingly.
Determine the correct F stop for flash exposure by using the calculator dial, exposure chart or guide number formula. Set the aperture ring to this F stop.
The table indicates proper synchronization speeds for most flash equipment.
Recommended; | Not recommended due to bulb quality |
36