Olympus zm2000qdk, OM-2 manual Setting the SELF-TIMER, Stopping the Self-timer

SETTING THE SELF-TIMER

Rotate the self-timer lever counter-clockwise

so that the shutter can be released after an elapse of delay time between 4 sec. to 12 sec.

according to the lever setting as shown above. You may set the self-timer lever either before or after advancing the film.

Turn the start lever clockwise to the vertical position to activate the self-timer lever. The shutter will then be released after the preset time.

Stopping the Self-timer

To stop the self-timer during its operation, turn

the start lever counter-clockwise. If you turn the

start lever clockwise again, the self-timer can re- sume its action.

NOTE: After setting the lever, you can release the shutter by pressing the shutter release button.

NOTE: If you do not reset the self-timer, the timer lever will begin moving immediately after advancing the film and the shutter will be releas- ed earlier than expected. If the film has not been

advanced fully, the timer lever will stop half-way. To re-activate the timer, move the start lever

counter-clockwise to stop the timer lever, return

the timer lever to the starting position, and ad-

vance the film. Then, turn the start lever again.

21