Olympus TG-320 instruction manual Taking pictures with Auto, Taking pictures with Manual

When set to [Auto] or [Manual], [Image Size] (p. 39) is fixed to [2].

The focus, exposure, zoom position (p. 21), and white balance (p. 36) are locked at the first frame.

The flash (p. 34) is fixed to $ (Flash Off) mode.

Taking pictures with [Auto]

1 Press the shutter button to take the first frame.

2 Move the camera slightly in the direction of the second

frame.

To exit the panorama function without saving an image, press the mbutton.

If the shutter does not automatically release, try [Manual] or [PC].

Taking pictures with [Manual]

1Use FGHI to specify at which edge the next picture is to be connected.

AUTO

Target mark

Direction for combining the next frame

MANUAL

Set OK

Pointer

Cancel MENU Save OK

Screen when combining images

from left to right

2Press the shutter button to take the first frame.

Joint areas

3Move the camera slowly while keeping it straight, and stop the camera where the pointer and target mark overlap.

●The camera releases the shutter automatically.

AUTO

MANUAL

1st frame

	MANUAL
1	2
Cancel MENU	Save OK

Cancel MENU Save OK

To combine only two pictures, press the A button before taking a third frame.

4Repeat Step 3 to take a third frame.

●After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed.

3Compose the next shot so that joint area 1 overlaps joint area 2.

	MANUAL
1	2
Cancel MENU	Save OK

Composition of the 2nd frame

EN 31