Olympus TG-320 50 EN, Adjusting the brightness of the monitor s, To adjust the monitor brightness

For information on using the menus, see “Setup menu” (p. 6).

Adjusting the CCD and the image processing function [Pixel Mapping]

s(Settings 2) X Pixel Mapping

This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended.

For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again.

To adjust the CCD and the image processing function

Press the A button when [Start] (Submenu 2) is displayed.

●The camera checks and adjusts the CCD and the image processing function at the same time.

Adjusting the brightness of the monitor [s]

s(Settings 2) X s

To adjust the monitor brightness

1Use FG to adjust the brightness while viewing the screen, and then press the A button.

s

Back MENU Set OK

Playing back images on a TV [TV Out]

s(Settings 2) X TV Out

The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type.

Submenu 2		Submenu 3	Application
	NTSC		Connecting the camera to a TV in North America, Taiwan, Korea, Japan,
			and so on.
Video Out
	PAL		Connecting the camera to a TV in European countries, China, and so on.
	480p/576p
HDMI Out	720p		Set the playback format.
	1080i
			Operate with the camera.
HDMI Control	Off
	On		Operate with the TV remote control.

The factory default settings differ according to the region where the camera is sold.

50EN