Olympus TG-320 instruction manual 32 EN, Shooting 3D images W mode, Taking pictures with PC

4Press the shutter button to take the next shot.

To combine only two pictures, press the A button before taking the third frame.

5Repeat steps 3 and 4 to take a third frame.

●After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed.

To exit the panorama function without saving an image, press the mbutton.

Taking pictures with [PC]

1Use FGHI to select the direction that the frames are combined.

2Press the shutter button to take the first frame, and then compose the second shot.

Before first shot

PC

Set OK

After first shot

PC

1 2

Exit MENU

●After the first shot, the area shown in white reappears on the side of the display opposite the pan direction. Frame subsequent photographs so that they overlap with the image in the monitor.

3Repeat Step 2 until the number of desired frames is taken, and then press the A button or mbutton when finished.

Panorama shooting is possible for up to 10 frames.

Refer to the PC software help guide for details on how to make panorama images.

Shooting 3D images (W mode)

In this mode, 3D images are shot for viewing on 3D-compatible display devices.

Images shot in 3D mode cannot be displayed in 3D on this camera’s monitor.

1 Set the shooting mode to W.

		3D Photo	3D P
			AUTO
		4 14M NORM	MENU
2	Press G to go to the submenu.
3	Use HI to select [Auto] or [Manual] and
	then press the A button to set.
	Submenu 1	Description
		After shooting the first frame, overlap
Auto		the subject with the image in the
		monitor. The next frame is taken
		automatically.
		After shooting the first frame, move
Manual		the camera to overlap the subject
		with the image in the monitor. Then
		manually release the shutter.

32EN