Olympus TG-320 52 EN, Saving battery power between shots Power Save, To resume standby mode

For information on using the menus, see “Setup menu” (p. 6).

Type C

Type D (CB-HD1)

3Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual.

4Turn on the camera, and use HI to select the image for playback.

Depending on the TV’s settings, the displayed images and information may become cropped.

To operate images with the TV remote control

1Set [HDMI Control] to [On], and turn off the camera.

2Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 51)

3First turn on the TV, and then turn on the camera.

●Operate by following the operation guide that is displayed on the TV.

With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen.

If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the camera.

Saving battery power between shots [Power Save]

s(Settings 2) X Power Save

	Submenu 2	Application
		Cancels [Power Save].
Off
		When the camera is not being used
On		for approx. 10 seconds, the monitor
		automatically turns off to save
		battery power.

Changing the display language [l]

s(Settings 2) X l

Submenu 2	Application
	The language for the menus and
Languages	error messages displayed on the
	monitor is selected.

To resume standby mode

Press any button.

52EN