Kodak DX7440 manual Setting the date and time, Checking camera status in capture mode

Getting started

Setting the date and time

Setting the date & time, first time

The Date and Time have been reset message appears the first time you turn on the camera or if the battery is removed for an extended time.

1SET DATE & TIME is highlighted. Press the OK button.

2Go to step 4 in Setting the date & time, anytime.

Setting the date & time, anytime

1Turn on the camera. Press the Menu button.

2Press to highlight Setup Menu , then press the OK button.

3Press to highlight Date & Time , then press the OK button.

4Press to adjust the date and time. Press to advance to the next setting.

5When finished, press the OK button.

6Press the Menu button to exit the menu.

NOTE: Depending on your computer operating system, Kodak EasyShare software may update the camera clock when you connect the camera. See EasyShare software Help for details.

Checking camera status in capture mode

The icons that appear on the camera screen indicate the active camera and picture settings.

Flash Landscape/Close-up Date stamp

Album name

Zoom: digital telephoto wide

Aperture

Shutter speed

Burst

Picture size Compression

Pictures/time remaining

Image storage AF mode Focus zone

Exposure metering

White balance

ISO

Battery Camera mode

Flash compensation Exposure compensation

www.kodak.com/go/support 5