Kodak DX7440 manual Charging the battery, Inserting the battery, Close the battery door

Getting started

Charging the battery

The Li-Ion rechargeable battery requires charging before first use.

1 2 3

1Insert the battery into the charger.

2Insert the plug that matches your electrical outlet.

3Plug the charger into the outlet.

The indicator light turns red. When the indicator light turns green, remove the battery and unplug the charger. Charging takes approximately 3 hours.

You can also charge the battery using an optional Kodak EasyShare printer dock or camera dock. Purchase these and other accessories at a dealer of Kodak products or visit www.kodak.com/go/accessories.

Inserting the battery

CAUTION:

Use only a Kodak EasyShare Li-Ion rechargeable battery.

Battery lock

1Turn the Mode dial to Off.

2On the bottom of the camera, slide the battery door and lift to open.

3Insert the battery as shown. Tilt the battery so the battery lock is pushed to the side. Push the battery into the battery compartment.

The battery lock holds the battery in place.

4Close the battery door.

2 www.kodak.com/go/support