Kodak DX7440 manual Troubleshooting, Camera problems, Try one or more of the following

7

Troubleshooting

When you have questions about your camera, start here. Additional technical information is available in the ReadMe file located on the Kodak EasyShare software CD. For updates to Troubleshooting information, see www.kodak.com/go/dx7440support.

Camera problems

If...	Try one or more of the following
The camera does not	■ Remove, then reinsert the battery.
turn on	■ Insert a charged battery.
The camera does not	■ Place the camera on a Kodak EasyShare camera or printer
turn off and the lens	dock (sold separately), then try again.
does not retract	■ Connect the camera to a Kodak 5-volt AC adapter (sold
	separately), then try again.
Camera buttons and
	See page 2 for more battery information.
controls do not
function
The camera screen	■ In any capture mode, press the Display/Info button.
does not turn on	■ Turn the camera off, then on again.
	To change the camera screen setting so that it is on whenever
	the camera is on, see Liveview (Auto), page 23.
In Review, a blue or	■ Transfer the picture to the computer.
black screen is	■ Transfer all pictures to the computer.
displayed instead of a	See page 42.
picture
The pictures	■ Continue taking pictures. The camera is operating
remaining number	normally.
does not decrease	(The camera estimates the number of pictures remaining after
after taking a picture	each picture is taken, based on picture size and content.)
Picture orientation is	■ Set the Orientation Sensor (page 25).
not accurate
Flash does not fire	■ Check flash setting, and change as needed (page 15).
Battery life is short	■ Wipe the contacts with a clean, dry cloth (page 3) before
	inserting a battery in the camera.
	■ Insert a charged battery (page 2).

44 www.kodak.com/go/support