Kodak DC210+ manual 2SHUDWLQJWKH&DPHUD, Qvwdoolqj%Dwwhulhv

& + $ 3 7 ( 5 ￿ ￿

2SHUDWLQJ￿WKH￿&DPHUD

This chapter describes basic camera operations, such as using batteries and the AC adapter, inserting and removing the memory card, and turning the camera on and off. This chapter also provides maintenance procedures for the camera.

,QVWDOOLQJ￿%DWWHULHV

The DC210+ camera comes with four Kodak Photolife AA batteries. Standard 1.5-volt (V) alkaline, 1.5-V lithium, or rechargeable 1.2-V nickel cadmium (Ni-Cd) or nickel metal hydride (Ni-MH) batteries may be used.

To install the batteries, perform the following steps:

1.Place your thumb on the battery door.

2.Slide the battery door away from the camera.

3.Insert the batteries as indicated on the battery door and close the door.

Remove the batteries if the camera will not be used for an extended period of time. Doing so extends battery life and prevents camera damage from battery leaks or corrosion. If the batteries are removed from the camera for more than a few minutes, the camera’s date and time features are deleted and must be reset. For information on setting the date and :time,$51,1*refer to￿7DNHFDUHZ“Date and Time” in Chapter 5.

hen removing the batteries as they may be hot. Allow them to cool before touching them.

Operating the Camera 2-1