3.Press the button.
The LCD displays the Exposure Compensation screen.
4.Press the and buttons to adjust the exposure.
5.Press
The exposure setting automatically resets to 0.0 EV when the camera is turned off.
7XUQLQJ2Q([SRVXUH/RFN
Use Exposure Lock to take a sequence of pictures that require the same exposure. When this setting is activated, the camera maintains a constant exposure setting. To turn on Exposure Lock, perform the following steps:
1.Set the mode dial to Capture.
2.Turn the camera on.
3.Press the button two times.
The Exposure Compensation screen appears, followed by the Exposure Lock screen.
NOTE: Press the button a third time to exit the Exposure menu.
4.Press the or button until ON is highlighted.
5.Press the
The Take a Picture screen appears.
6.In the viewfinder, center the area in which you want to lock the exposure.
7.Press the shutter button to lock in the exposure setting.
The Exposure Lock setting automatically resets when the camera is turned off.
$GMXVWLQJ&DPHUD6HWWLQJV8VLQJWKH6WDWXV 'LVSOD\
The status display, located at the top of your camera, allows you to view and change some camera settings. The following sections offer detailed descriptions of status display settings.
NOTE: The camera must be turned on to view the status display.