To delete the picture that was just taken without leaving Capture mode, perform the fol- lowing steps:
1.Set the mode dial to Capture.
2.Turn on the camera.
3.Take a picture.
The picture is displayed on the LCD.
4.Press the button.
The delete screen appears in the LCD.
NOTE: The picture must be showing on the LCD screen to activate the delete screen.
|
|
|
|
| button |
button |
|
|
|
| |
|
|
|
|
| button |
|
|
|
|
| |
| button | ||||
|
|
5.Press the or button until the correct delete option is highlighted.
6.Press the
The picture is deleted from the memory card.
To exit, press the or button until NO is highlighted, and then press the
$GMXVWLQJWKH([SRVXUH9DOXH
The camera’s exposure value (EV) can be adjusted from
If your pictures are too dark, increase (+) the exposure compensation setting. If they are too light, decrease
&KDQJLQJ([SRVXUH&RPSHQVDWLRQ
To change exposure compensation, perform the following steps:
1.Set the mode dial to Capture.
2.Turn the camera on.
Taking Pictures