Konica Minolta G600 instruction manual Installing and removing a memory card

Installing and removing a memory card

Always turn off the camera and confirm the indicator lamps are out before chang- ing the memory card, otherwise the card may be damaged, and data lost.

An SD Memory card, MultiMediaCard, or Memory Stick must be inserted for the camera to operate. If a card has not been inserted, a no- card warning appears on the LCD monitor.

Slide the battery-chamber door toward the side of the camera to release the safety catch (1). Open the door.

Insert the memory card all the way into the card slot and then release (2). The Memory Stick slot is next to the battery; the SD Memory Card / MultiMediaCard slot is next to the back of the camera. The card should catch in the slot. Always push the card in straight, never at

an angle. Never force the card. If the card does not fit, check that it is oriented cor- rectly.

To eject a memory card, press the card into the slot and release (3). The card can then be pulled out.

Close the battery-chamber door and slide it toward the camera to engage the safety catch

(4).

1

2

3

4

18 GETTING UP AND RUNNING