Playback / Erasing
Playing A Recorded Movie Clip
Please set the Mode Dial at Playback Mode ( 
). Use Up ( 
)
and Down( 
) Direction Buttons to select a movie clip. Select a recorded movie clip.
Press Right Direction Button ( 
) to play the movie clip.
Note
You can press Right Direction Button ( 
) to pause the playing and
press Right Direction Button ( 
) again to cancel the pause.
Going Into Thumbnail Images (Small Images)
Please set the Mode Dial at Playback Mode ( 
) .
1.Press Left Direction Button( 
) to enter thumbnail image table.
2.Use Up( 
) and Down( 
) to select an image or movie clip.
3.Press Right Direction Button( 
) to enlarge the selected image or movie clip.
4.To go back to the thumbnail image table press Left Direction
Button ( 
) again.
Note
When a thumbnail image is selected, please check if it shows ( 
) on
the left top corner of the LCD screen. If ( 
) is shown it means the selected thumbnail is a movie clip but not a still image.
Deleting Image(s)
Please set the Mode Dial at Playback Mode ( 
) and press Menu Button to enter "Play" menu table.
1.Select "Delete"
2.(a) Select "Delete Image" to confirm the willing to delete the selected image or movie clip.
(b)Select "Delete All" to confirm the willing to delete all stored images or movie clips.
3.Select "No" to cancel the order or select "Yes" to delete.
4.Press Right Direction Button ( 
) to confirm the setting.
32
Installing Camera Driver
Under Microsoft Windows 98 / 98SE
1.Turn on the computer.
2.Insert the CD into the
If the PC is set to auto run the program, simply click "Driver" to start the installation.
If the PC is not set to auto run the program, please go to the Start Menu, click "Run" and key in
33